لوله فولادی ضد زنگ

304 180 degree Stainless Steel Elbow product stainless steel elbow type seamless elbow, welded elbow surface pickle sand, polished degree 45 degree, 90 degree, 180 degree R 1D, 1.5D etc, as required material 200 series: 201 300 series: 301,303/Cu,304/L/H,304Cu,305,309/S,310/S,316/L/H/Ti,321/H,347/H,330, 400 series: 409/L,410,416/F,420/F,430,431,440C,441,444,446, 600 series: 13-8ph,15-5ph,17-4ph,17-7ph(630,631),660A/B/C/D, Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS

304 90 degree Stainless Steel Elbow product stainless steel elbow type seamless elbow, welded elbow surface pickle sand, polished degree 45 degree, 90 degree, 180 degree R 1D, 1.5D etc, as required material 200 series: 201 300 series: 301,303/Cu,304/L/H,304Cu,305,309/S,310/S,316/L/H/Ti,321/H,347/H,330, 400 series: 409/L,410,416/F,420/F,430,431,440C,441,444,446, 600 series: 13-8ph,15-5ph,17-4ph,17-7ph(630,631),660A/B/C/D, Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS

304 316 321 180 90 45 60 30 15 degree Stainless Steel Elbow product stainless steel elbow type seamless elbow, welded elbow surface pickle sand, polished degree 45 degree, 90 degree, 180 degree R 1D, 1.5D etc, as required material 200 series: 201 300 series: 301,303/Cu,304/L/H,304Cu,305,309/S,310/S,316/L/H/Ti,321/H,347/H,330, 400 series: 409/L,410,416/F,420/F,430,431,440C,441,444,446, 600 series: 13-8ph,15-5ph,17-4ph,17-7ph(630,631),660A/B/C/D, Duplex: 2205(UNS S31803/S32205)

ASME TP316 12X1 Annealed and Pickled Thin Wall Stainless Steel Tubing Torich is a manufacturer and trader for Annealed and Pickled Thin Wall Stainless Steel Tubing, with grade TP304/304L, TP316/316L, the products are exported to over 30 countries worldwide. Size:ANSI /ASME size is under,other standard of size is for ready choice O.D.:0.23'to 48'(5.8-1219mm) W.T.:0.04'to 2'(1.0-50.8mm) Length:Max.18 Meter NPS 1/8'-48' Schedule:5/5S,10/10S,20/20S,40/40S,80/80S,120/120S,160/160S

2205 Round ASTM A213 25mm Stainless Steel Tube for Chemical Industry Product Discription Producsts Name ASTM A213 Seamless Feritic Austenitic Alloy-Steel Boiler,Superheater, Heat Exhchanger Tubes Technical Standard TP316 TP304 T5 T9 T11 T12 T21 T22 T91 T92 Size Range OD: 3.2-127mm WT: 0.4-12.7mm Length: 6m-12m Cutting Length: according to customers PO. Surface Treatment/Surface Condition Pickling,Blasting,Polishing Tube Inspection Tensile Requirement Hardness Requirement

Heat Exchanger Perforated Round Seamless Duplex Stainless Steel Tube Torich is a manufacturer and trader for Annealed and Pickled Thin Wall Stainless Steel Tubing, with grade TP304/304L, TP316/316L, the products are exported to over 30 countries worldwide. Size:ANSI /ASME size is under,other standard of size is for ready choice O.D.:0.23'to 48'(5.8-1219mm) W.T.:0.04'to 2'(1.0-50.8mm) Length:Max.18 Meter NPS 1/8'-48' Schedule:5/5S,10/10S,20/20S,40/40S,80/80S,120/120S,160/160S

ASTM A312 Stainless Steel Seamless Pipe 1 Inch Schedule 40​ Size : O.D.:5-420mm W.T.:0.5-50mm L:max12000mm Production method: ERW Packing: In hexagonal bundles, in wooden boxes, in woven bags, in nude. Type:Stainless QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing and Cold Rolling, on line inspection 5. Heat Treatment, +A, +SRA, +LC, +N, Q+T 6. Straighten

ASTM A312 316 14*1 Polished Small Diameter Stainless Steel Pipe Bright annealed stainless steel tubes as per following standard: ASTM A213 ASTM A269 EN10216-5 TC-1 Tolerance:D4/T3 (±0.5%,±0.1 min)/(±10%,±0.2 min) NDT Tests:Eddy Current or Hydraulic Test or UT Heat treatment on tubes: Bright Annealed stainless seamless tube Quality Assurance: ISO 9001&PED 97/23/EC certificated with 100% traceability on all instrument tubes and material test reports(EN 10204/3.1B)accompany

ASTM A312 304 316 Stainless Steel Precision Seamless Stainless Steel Tube Products Description: Precision Seamless Stainless Steel Tube Application: For Chemical Industry, petroleum, electronics, air conditioning Steel Grade/Steel Material: 304, 304L, 316, 316L, 310S, 2205, 2507 Size Range: OD 5-80mm WT 1-10mm Length According to customer requirement Section Shape: Round or Shaped Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth