high carbon steel tube
"
لوله های فولادی آلومینیوم جوش داده شده EN10130 برای لوله های اگزوز خودرو
EN10130 Welded Aluminized Steel Tube For Automobile Exhaust Pipe Applications: For Automobile Exhaust Pipe Technique: ERW Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: DC01 DC02 DC03 DC04 DC05 DC06 DC07 Size range: O.D. 5-420mm W.T. 0.5-50mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Chemical Composition: Product Show: FAQ: Q: Are you
لوله فولادی آلیاژ نیکل NS3306 ASTM B444 Inconel 625 برای استفاده در صنعت
Nickel Alloy steel tube NS3306 ASTM B444 Inconel 625 Applications: For industry use Technique: Cold Drawn Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: UNS N06025 NS3306 2.4856 Inconel 625(SMC) Size range: O.D. 6-219mm W.T. 1.0-12.7mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Chemical Composition: Grade C Si Mn P S Cr Ni Mo Al Other
ASTM A513 1.75 120wall DOM لوله فولادی
A513 1.75 120wall dom tubing ASTM A513-5 steel pipes produced by DOM production Method. Quick detail: Standard :DIN 2393 EN10305 ASTM A519 GOST 5005 -82 DIN2394 JIS-G3445 DIN2391 BS6323 GOST8734-75 IS3074 ASTM A513 Material:St37.2 St 44.2 St52.3 etc Delivery condition:NA,No heat treatment Material St37.2 St 44.2 St52.3 etc Production method Welded precision Delivery condition BK,BKW,BKS,GBS,NBK Test DIN 2393 Decription: Straightness ≤0.5mm/1m Roundness ≤0.5 OD range:15-200mm
لوله فولادی دقیق OD21.7mm 304L 316L Duplex 2205
Torich 304 304L 316L Duplex 2205 2507 Welded Stainless Steel Tube Pipe Type: Stainless, Grade: TP304,TP304L, TP316,TP316L, TP321 1.4301 Technical: welded Usage: Petroleum&Chemical industry Size: OD: 6.25-254mm WT: 0.5-12mm QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing and Cold Rolling, on line inspection 5. Heat Treatment, +A, +SRA, +LC, +N, Q+T 6.
12000 میلی متر طول S32750 2205 لوله از جنس استنلس استیل دوبلکس
Torich UNS S32205 S31803 S32750 2205 Duplex Stainless Steel Tube Type: Stainless, Grade: TP304,TP304L, TP316,TP316L, TP321 1.4301 Technical: welded Usage: Oil, Petroleum&Chemical industry Size: OD: 6.25-254mm WT: 0.5-12mm QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing and Cold Rolling, on line inspection 5. Heat Treatment, +A, +SRA, +LC, +N, Q+T 6.
15CrMo asm sa789 لوله فولاد ضد زنگ دوبلکس
15CrMo asm sa789 duplex stainless steel tube Applications: For chemical , boiler industry, construction Technique: Cold worked and hot worked Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: Material 200 series: 201, 202 300 series: 304, 304L, 304H, 310S, 316, 316L, 317L, 321,310S,309S,2205,2507,2520 400 series: 410, 410S,420, 430, 431, 440A,904L Size range: O.D. 8-530mm W.T. 0.5mm-30mm Length max 12000mm Characteristic: Good concentricity Good
JIS G3459 لوله فولادی ضد زنگ بدون درز و جوش داده شده برای سرویس فشار
JIS G3459 Seamless and welded stainless steel tube for pressure service Applications: For pressure service,hign and low temperature service Technique: Cold worked and hot worked Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: SUS304TP SUS310TP SUS316TP SUS317TP SUS347TP etc Size range: O.D. 4-305mm W.T. 1-50mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH
BS 6323-4 CFS3 لوله های فولادی بدون درز 6-280mm OD
BS 6323-4 CFS3 Cold Finished Seamless Steel Tubes For Automotive Industry Material Carbon steel cold-finished seamless tubes, manufactured according to the BS 6323-4 standard (Part 4), specifically for automotive, mechanical, and general engineering uses. Specifications Standard: BS 6323-4, Part 4 – cold-finished seamless tubes Seamless cold finishing; residual lubricant permissible unless specified Delivery conditions: BK (hard), BKW (soft), GBK (annealed), GZF (annealed &
EN10305-2 لوله دمی لوله دمی دقیق سرد جوش داده شده برای سوراخ های موتور سیکلت
EN10305-2 DOM Pipe for Motorcycle Shock Absorbers EN10305-2 Welded Precision Cold Drawn Steel Tubes Applications: for Auto industry/for machinery use/Oil Cylinder Tube/Motorcycle shock absorber Auto shock absorber inner cylinder/Telescopic Cylinders Size range: O.D.:6-350mm W.T.:1-35mm L:max12000mm Characteristic:High precision with smooth ID tolerance and roughness Steel Grade and Chemical Compositions Steel Grade C Si Mn P S Steel name Steel number max max max max max E155
